https://trevs.site/posts/3D_Printing_and_Open_Source.html
3D Printing and Open Source I've been dabbling in a bit of DIY project electronics and wanted to design a few enclosures, but didn't want to send out to have something printed or mold injected and then have it not be what I wanted. So, instead, I decied it made more sense to spend a hundreds of dollars on a 3D printer. It turns out that my timing was perfect, cause there is a company called Bambu Lab that is making 3D printing super accessible for those who are just starting out. If you remember ten years ago when 3D printing became popularized, you'll remember how difficult it was to get into
3D Printing and Open Source I've been dabbling in a bit of DIY project electronics and wanted to design a few enclosures, but didn't want to send out to have something printed or mold injected and then have it not be what I wanted. So, instead, I decied it made more sense to spend a hundreds of dollars on a 3D printer. It turns out that my timing was perfect, cause there is a company called Bambu Lab that is making 3D printing super accessible for those who are just starting out. If you remember ten years ago when 3D printing became popularized, you'll remember how difficult it was to get into
Views: 5
Categories: General [c1], Technology & Open Source [c124]